EcoHome Expert, Inc.

Let us prove our value to you.

A built-up roof program is actually a popular selection for buildings with low-slope or flat roofs. Usually referred to by the acronym BUR, this technique has been utilized for 100-plus years in the U.S.

This roof system is known for giving superb protection resulting from its redundant nature because it may be created up of various layers of ply sheets and asphalt. These layers are then topped off by a cap sheet or a flood coat of asphalt and granules. The several plies deliver resistance to climate and heavy-duty protection for the building.

How Do Built-Up Roofing Systems in Rockford, IL Operate?

Built-up roofing systems are an evolution of your asphalt roofing strategy. As compared to other roofing materials (such as metal roofs), BUR roofing membranes are created via a layering method of bitumen and reinforcing fabrics. They may be most normally employed on low-slope roofs or flat roofs.

When installing a BUR program, there is a layer of bitumen, which consists of asphalt, coal tar, or cold-applied adhesive that is placed across the roof deck. (If necessary, you could fasten a base sheet just before putting this layer on to make a secure and sturdy space to perform).

As it’s covered ply sheets (or roofing felts) of hot asphalt and tar fabric or fiberglass are rolled down. These are usually known as “plies.” On the prime layer, the surfacing aggregate is then placed for durability and aesthetics. Furthermore, a reflective coating might be added to meet cooling needs.

Because of the numerous layers of bitumen involved, not merely are BUR systems extremely durable (offering higher resistance to fire and wind), but they’re also fairly heavy. Built-up roofing systems in Rockford, IL also have high reflective qualities (when a reflective coating is utilized), assisting to save power costs and preserve inside temperatures consistently.

Constructed Up Roof Material Standards

The National Roofing Contractors Association (NRCA) doesn’t give a recommendation regarding the items or any producers. However, the association does advise that bitumen, felt and matting for built-up roofing systems in Rockford, IL must adhere to the requirements held by the American Society for Testing and Components International (ASTM International).

The Installation Course of Action of a Built-Up Roofing Systems in Rockford

In the event the bitumen is created of asphalt or coal tar, it will be brought to a high temperature before being applied either with mops or mechanized spreaders. If the bitumen for the constructed-up roofing is really a cold-applied adhesive, heating before the application is not needed.

For the last layer of a constructed-up roof either rock or gravel aggregates, glass-fibers or mineral surfaced cap sheets are spread. This is covered using a finishing ply of asphalt, aluminum coating, or possibly a polymer coating known as an elastomer. Apart from these common supplies, a constructed-up roof may well also contain a 2 or 3-ply cap sheet method of polymer-modified bitumen. These kinds of built-up roof systems are known as “hybrids.”